|
|
Post by Jake LaPierre on Mar 9, 2016 20:32:37 GMT -9
Where's everyone mounting their hand cannon?  |
|
|
|
Post by Brook Green on Mar 9, 2016 21:11:29 GMT -9
I hate Guns, and would NEVER own one, but that is exactly where I would mount mine.  |
|
|
|
Post by Brook Green on Mar 9, 2016 21:13:09 GMT -9
Especially if it was a 1911
|
|
|
|
Post by Mike Hanzuk on Mar 9, 2016 21:16:44 GMT -9
Mines strapped to my hip or it goes in the center console
|
|
|
|
Post by Jake LaPierre on Mar 10, 2016 10:09:21 GMT -9
The 1911 is little cumbersome strapped to the hip on a longer driver, also the one time I had to draw on someone, that location made it super easy to grab without being noticed by the offending party. Brook Green we love our 1911's in this house.  |
|
|
|
Post by levimattfield on Mar 10, 2016 11:40:52 GMT -9
I love my FNX-45 Tac
|
|
|
|
Post by levimattfield on Mar 10, 2016 11:41:19 GMT -9
|
|
|
|
Post by Mike Hanzuk on Mar 10, 2016 12:33:32 GMT -9
The 1911 is little cumbersome strapped to the hip on a longer driver, also the one time I had to draw on someone, that location made it super easy to grab without being noticed by the offending party. Brook Green we love our 1911's in this house. Yeah I switched to a smaller .45 for carry. Look in to a Kahr .45, you can get one for around $400 or less. They accept 1911 mags which is why I got it so my ammo and mags are interchangeable. It's small light weight thin yet still fits your hand good. |
|
|
|
Post by Jake LaPierre on Mar 10, 2016 12:54:11 GMT -9
Mike Hanzuk I'll check it out, I've been looking at the .45 XDS for awhile, just haven't been able to shoot one yet to see if I like it.
|
|
|
|
Post by Mike Hanzuk on Mar 10, 2016 13:50:14 GMT -9
Well if you want to shoot a Kahr let me know, we'll go shooting
|
|
|
|
Post by Jake LaPierre on Mar 10, 2016 14:08:52 GMT -9
Sounds like a plan, ill bring some other goodies as well.
|
|
|
|
Post by Brook Green on Mar 11, 2016 22:18:37 GMT -9
Nothing better than a nice 1911. This is one I built off a Springfield Light Weight Operator that I kinda destroyed a few years ago. Long story. Spent a lot of time tweaking this one.  |
|
|
|
Post by Jake LaPierre on Mar 11, 2016 23:14:41 GMT -9
What do you have done to it? I polished the feed ramp, did a flat trigger and shaved the trigger pull down to about 3 pounds on my full size. The RO is completely untouched at this point in time... But I have a .460 Rowland kit for my full size that need to take for a rip one of these days...
|
|
|
|
Post by Brook Green on Mar 12, 2016 21:09:06 GMT -9
|
|
|
|
Post by Jake LaPierre on Mar 12, 2016 23:49:49 GMT -9
Brook Green you weren't kidding when you said it was a long story... But I went through all 16 pages lol. I'm starting to see some transparency between your builds though... Have you been seen for OCD? Lol, great build and story man.
|
|
|
|
Post by Jeremy May on Mar 13, 2016 4:33:29 GMT -9
Brook that is crazy. But crazy awesome!
|
|
|
|
Post by Mike Anagnostou on Mar 13, 2016 9:50:46 GMT -9
Still need to make a mount for my daily. For now it just gets clipped to the ash tray. Wheel gun usually goes in the door. Nothing fancy.   |
|
|
|
Post by Mike Hanzuk on Mar 13, 2016 11:15:15 GMT -9
Alternating .45LC and 410??
|
|
|
|
Post by Mike Anagnostou on Mar 13, 2016 11:22:22 GMT -9
Alternating .45LC and 410?? Yeah, wax filled hp's and pdx 410's.  |
|
|
|
Post by jakebartley on Mar 14, 2016 13:54:42 GMT -9
 For sale! Mount these in your truck! |
|
|
|
Post by Jeremy May on Mar 14, 2016 15:22:48 GMT -9
Put them in the classified add on here. If they are for sale
|
|
