|
|
Post by Geoff Herd on Feb 14, 2016 19:10:02 GMT -9
Well I guess it's time to start a build thread. So a little background on the truck. I purchased the truck in Indiana with 54k miles truck had a good start for a build but needed some fixing. It did 709/1404 on the dyno with that setup. Had 60% over injectors and 66/s475 compounds. Since then I have changed up some things a little. Here is what the cirrent build consists of.
66/S483 compounds
250hp bd injectors which actually flowed 225% over
Evil twin cp3 kit
HD pushrods
HD valve springs
Aftermarket intercooler
Fass 150
1 piece drive shaft
Custom traction bars
Airbags
Leveling kit
35x12.50r20 nitto terra grappler g2
20x9 xd wheels
Soon to come.....
Fass 260
6 point roll bar
Drive shaft hoops
Removing leveling kit and doing a reverse level
305/55r20 nitto terra grappler
20x10 dropstars 645B
Full isspro gauge setup
|
|
|
|
Post by Brook Green on Feb 14, 2016 20:25:23 GMT -9
Pics or it never happened!  |
|
|
|
Post by Geoff Herd on Feb 14, 2016 20:27:48 GMT -9
|
|
|
|
Post by Geoff Herd on Feb 14, 2016 20:28:58 GMT -9
|
|
|
|
Post by Jeremy Narlock on Feb 14, 2016 21:34:36 GMT -9
Nice socks!!! What brand are they??
|
|
|
|
Post by Geoff Herd on Feb 14, 2016 21:40:04 GMT -9
Adidas you like?
|
|
|
|
Post by Jeremy Narlock on Feb 14, 2016 22:02:44 GMT -9
Yeah man, need to get me some of thise
|
|
|
|
Post by Brook Green on Feb 15, 2016 5:28:19 GMT -9
Talk to me about that transmission dipstick thingy you got there. Looks like a factory locking dipstick in some sort of braided stainless hose.
|
|
|
|
Post by Jeremy May on Feb 15, 2016 8:27:42 GMT -9
Talk to me about that transmission dipstick thingy you got there. Looks like a factory locking dipstick in some sort of braided stainless hose. How long did you look at it to see that? Haha |
|
|
|
Post by Geoff Herd on Feb 15, 2016 9:05:43 GMT -9
It's a duramax dipstick supposedly
|
|
|
|
Post by Geoff Herd on Feb 15, 2016 9:53:56 GMT -9
Also looking into 5 point harnesses, a trans blanket and harmonic balancer. Brook do you have any insight on any of that? I found suncoast makes a sfi 4.1 blanket for the 48re so gunna go with that. I'm trying to figure out how the harnesses attach. I will hopefully be using stock 4th gen seat. But possibly my stock 3rd gen seats.
|
|
|
|
Post by Jeremy May on Feb 16, 2016 11:35:15 GMT -9
What's going to happen if you don't make 1000whp this summer on the dyno?
|
|
|
|
Post by Geoff Herd on Feb 16, 2016 16:32:13 GMT -9
Then I will be getting ready to purchase a non gated t4 secondary. The gated secondary is my choke spot. I have the fuel for 1200 but air is limited due to a t3 manifold and internal gate on the secondary. But even if I don't hit it I will stay with this setup for awhile until and can save up enough for a side by side compound kit because the kit I have now sucks. So I will just buy a whole new kit with a new primary and secondary and remove the passenger side battery
|
|
|
|
Post by Brook Green on Feb 16, 2016 17:44:52 GMT -9
Also looking into 5 point harnesses, a trans blanket and harmonic balancer. Brook do you have any insight on any of that? I found suncoast makes a sfi 4.1 blanket for the 48re so gunna go with that. I'm trying to figure out how the harnesses attach. I will hopefully be using stock 4th gen seat. But possibly my stock 3rd gen seats. Haisley Machine offers the closest thing to actually providing a safe trans blanket; it covers all he way up to the back of the motor. If you ever actually need it, it's the only thing on the market worth considering at this point. Get a cam lock 5 point harness and an install kit with quick discos. Weld a big arse washer to the floor in front of your seat and bolt through that. Follow regulations to a tee! Don't spend too much because they are only good for two years and it's almost cheaper to replace than get them re-certified. Read up on cummins balancer failures. Get the arp bolts and install the extra roll pin. I bought a Fluidamper. |
|
|
|
Post by Geoff Herd on Feb 16, 2016 17:48:13 GMT -9
Ok awesome ya I just started looking into stuff for 10.0-11.49. How do you like the fluidamper?
|
|
|
|
Post by Brook Green on Feb 16, 2016 19:47:57 GMT -9
Its a nice piece. I'd like to put one on the Dually.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 16, 2016 22:08:53 GMT -9
get a fluid dampner and be done with it. get the drivehub attachment while ur at . ul thank me later
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 16, 2016 22:33:44 GMT -9
i also have a spare suncoast sfi blanket for sale if u interested . only protects the case from sprag explosion. no oil saving abilitys
|
|
|
|
Post by Geoff Herd on Feb 16, 2016 22:36:41 GMT -9
Thanks caleb looking forward to this upcoming season. I need to get a cage put in the mega cab also along with everything else. Plus in the process of buying a house so somewhere all this will fit maybe
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 16, 2016 22:49:24 GMT -9
|
|
|
|
Post by snowman on Feb 23, 2016 22:48:27 GMT -9
Sweet truck!!
|
|
|
|
Post by Geoff Herd on Feb 24, 2016 8:33:53 GMT -9
Thank you. Can't wait to get it back. Truck is currently down with a bad ecm.
|
|
